Wright Safety Solutionsestablished 2006


providing Health and Safety for Coventry, Warwickshire, Northamptonshire, Leicestershire medium/small businesses

Welcome to Wright Safety Solutions, an occupational health and safety consultant service for the smaller businesses in Coventry, Warwickshire, Leicestershire and Northamptonshire

Introductory offer:
until end of Julyh 2017 I'm offering a first consultation visit free with a written report
to any medium/small business in Coventry, Warwickshire, Leicestershire and Northamptonshire.


Wright Safety Solutions was set up by Mr John Wright in November 2006, aiming to offer the service of safety consultant to small and medium-sized businesses in the Coventry and Warwickshire and also extending to some Leicestershsire and Northamptonshire areas.

Local businesses and construction sites have benefitted from guidance and training in risk assessment, lifting equipment, machinery guarding, accident investigation, COSHH, safety management.

John A. B. Wright
B.Sc., TechIOSH
safety qualification: NEBOSH (Gen.Cert.)


4 Shuna Croft, Coventry CV2 2RY
Mobile: 0779 3880597
Tel: (024) 76618235

safety@jabw.demon.co.uk
http://www.wrightsafety.co.uk



Mr. Wright has a degree in Chemistry and 30 years experience with PPG Industries Ltd. in the paint, chemical and motor plant industries including as Safety Manager for 3 years at PPG Industries, Oldbury, and 5 years before that as Automotive Laboratory quality and safety manager in Ladywood, Birmingham.

Mr. Wright achieved the NEBOSH General Certificate after attending the course at Warwickshire College, was admitted as a TechIOSH member in 2007, and has completed nine years CPD with IOSH.

Many small and medium-sized businesses and construction sites have an urgent need for advice and services in the area of occupational health and safety, to assist their compliance with UK safety regulations. Wright Safety Solutions can offer smaller companies advice and services in the area of occupational health and safety, safety inspections, fire safety surveys, safety planning, and accident and incident investigations, UK regulations, particularly for businesses using machinery, chemicals or paints in engineering environments.

Wright Safety Solutions is also offering safety services to Clients and Principal Contractors in construction projects, as a safety adviser to assist with compliance with the new CDM 2015 regulations. (See the section on Construction on the menu to the right of this page).

As a sole-trader, Wright Safety Solutions can offer these services to smaller businesses at a very competitive rate. My basic rate is at present 36 per hour or discount 240 per day (120 per half day) but Wright Safety Solutions is very flexible and I will consider other possible arrangements.

Note:
If your main reason for wanting a safety consultant is as "access to a competent H&S person" e.g. for Constructionline or SafeContractor accreditation purposes, then please note that I may offer to help with this but I will need to verify that your operations and work practices will comply with your own written safety policy and your own risk assessments. I will offer to re-write these documents where necessary. This verification will likely require several inspections or audits of your workplace, likely costing at least 240.



Your safety summary:

OK, if you want to be serious about safety there are several issues to cover. I can offer a complete package or we can make a start on a particular issue that concerns you and then go from there.

In order for you to completely comply with the law and avoid problems with insurers, local authorities and inspectors, there are a number of things I can do with you. The basis of everything about safety at your site is YOUR safety policy. You can't borrow someone else's. It has to be yours. To understand what you need to do requires some knowledge of safety law. There's about 50 important laws but depending on the nature of your business it's possible that familiarity with just a few is all you need.

Safety should involve everyone, and you should have colleagues or supervisors within your staff to help you manage safety in the workplace, and you need to ensure ALL your staff are committed to safety, so some training will help there.

If you have an accident or safety incident you need to know how to respond, how to investigate and if it has to be reported. You need to know about risk assessment - and that helps avoid accidents and incidents, AND help avoid an employee putting in a compensation claim against you.

Accidents and incidents can also be avoided with correct signs, appropriate machine guards and employee training in manual handling. You can also save your business by ensuring you prevent it from burning down! Prevent fire - detect it, contain it, escape from it - YOU need to DO your own fire risk assessment now, and I can help.

Improve the work conditions for your employees and reduce injuries and claims - learn how to handle chemicals, how to manage traffic, how to reduce noise, how to reduce stress at work.

Solve your problems by getting me involved in safety investigations and keep your safety performance on track by committing me to carry out regular safety inspections.

Avoid surprises from inspectors, let me set everything in place for you. You can think about each safety issue in detail if you click the buttons on the menu to the right. Then give me a call. And remember for a few more weeks I'm offering a first consultation visit free with a written report to any small/medium business in Coventry and Warwickshire and Northamptonshire.

For further information on each subject check the Frequently Asked Questions page (click FAQ button below) or for much more detailed information click any of the menu buttons on the right of this page.

NOTE: My basic rate is at present 36 per hour or discount 240 per day (120 per 4-hour half day) but Wright Safety Solutions is very flexible and I will consider any of the possible arrangements discussed at the Your Safety Consultant page, see menu right of this page.

Wright Safety Solutions is covered by Professional Indemnity insurance to max. 500,000 (Trafalgar Risk Management Ltd).

John A. B. Wright
B.Sc. (Chem), TechIOSH
safety qualification: NEBOSH (Gen.Cert.)

4 Shuna Croft, Coventry CV2 2RY
Mobile: 0779 3880597
Tel: (024) 76618235

safety@jabw.demon.co.uk
http://www.wrightsafety.co.uk

photo1 photo2 photo3 photo4
chemical
hazard
is this a suitable
machine guard ???
you can avoid
fires like this
suitable PPE
smart too!


Support gratefully received from

Coventry.orgCoventry.org - Coventry.org is an excellent local directory of businesses and lots more!
Coventry
Only
Coventry Only - Coventry Only is full of information and links for visitors to Coventry. Jobs, Entertainment, Properties, Business and lots more!
UK Free Directory - FreeIndex.co.uk freeindex.co.uk / Workplace_Safety / Health_and_Safety
Business
Magnet
Directory
Attract the right results with Businessmagnet


JJill.com Sale
JJill.com Sale

Category: Health and Safety consultants
Category: Occupational Health and Safety consultants
Category: Health and Safety services
Category: Health and Safety adviser
Category: Health and Safety advisor
Category: Safety consultants
Category: Safety services
Category: Safety adviser
Category: Safety advisor
Category: Safety consultant
Category: Health and Safety consultant


John Wright Copyright 2007

this page last updated 6 March 2016safety@jabw.demon.co.uk